Remedial Neoprene Wall Ties use in domestic dwellings and small commercial buildings up to three storeys, (not greater than fifteen metres in height). Suitable where the walls are sound and comprise of brick or blockwork of similar thickness. Unsuitable for timber framed buildings. These ties are simple to install and the inner leaf connection can be checked before the outer leaf is tightened.
Remedial Neoprene Wall Ties suitable where the walls are sound. These Neoprene Wall Ties ties are simple to install and inner leaf connection can be checked before the outer leaf is tightened. Unsuitable for timber frame buildings.
- The inner neoprene spreader has oversized ridges to create an immediate grip on the wall of the hole removing the reliance on the knurled nut to hold whilst the inner section of the tie is expanded.
- To reduce damage to the brickwork and to allow for movement between the two leaves without reducing any performance in tension. A drip ring is fitted.
The combination of the special stainless steel precision limited torque nut and the precision modified bar means that initial rotations of the nut are inhibited by the bar. This allows the bar to rotate and the inner expander to engage with and tighten onto the inner wall leaf. At the correct pre-designed torque, the in-built resistance offered by the special nut and bar combination is overcome. This allows the nut to rotate down the bar and tighten the outer expander to similarly engage with and tighten onto the outer wall leaf.