• BITUMEN PRIMER

Waterproofing

Bondit Bitumen Primer – 5 Litres

£21.50 Inc VAT

Bondit Bitumen Primer - 5 Litres, A quality grade, highly penetrative, bituminous solution for priming surfaces prior to the application of bituminous materials and flashing tapes. Heavy duty formula making it suitable to prime concrete roofs and floors, cementitious screeds/renders, bitumen felt, weathered bitumen, mastic asphalt, weathered, corrugated iron and steel. High quality, low viscosity solvent-borne, BITU-BOND Bituminous black paint Primer. It is weather proof and provides long lasting protection, that when dry it forms an odourless and taint-free bitumen film. Keep the water out! read more

Compare

SKU:
Bondit Bitumen Primer - 5 Litres
view all details
Brand:
Brand:

Description

Bondit Bitumen Primer – 5 Litres, A quality grade, highly penetrative, bituminous solution for priming surfaces prior to the application of bituminous materials and flashing tapes.

Heavy duty formula making it suitable to prime concrete roofs and floors, cementitious screeds/renders, bitumen felt, weathered bitumen, mastic asphalt, weathered, corrugated iron and steel.

High quality, low viscosity solvent-borne, BITUBOND Bituminous black paint Primer. It is weather proof and provides long lasting protection, that when dry it forms an odourless and taint-free bitumen film. Keep the water out!

Bond-It Bitumen Paint Primer can be used for the protection of ferrous and non-ferrous metals, concrete, roofing felt, fibre/cement, corrugated iron, asphalt and wood against water. Reduces corrosion and decay. It is often used on rough, porous or friable surfaces when using flashing tape to ensure a good seal.

  • Drying time 6 hours (depending on temperature)
  • Black colour
  • Brush or Spray
  • Easy to apply

Ensure all surfaces are clean, dry and dust-free. Remove any loose particles and any rust with a wire brush & soft broom. If there is any rust left it should be treated with a rust inhibitor primer. The surfaces to be treated should be completely dry.

The Bitumen paint is ready for use and does not require thinning. Apply at least two coats. It is possible to apply the paint using either a brush or spray gun. Allow each coat to dry (approximately 6 hours) before applying the next coat.

  • 1 Litre covers 4-6 metres squared (depending on porosity)
  • Drying time 6 hours (depending on temperature)
  • Can be applied using a brush or spray
  • Easy to apply
  • Black colour, so it will match bitumen