Belfast sink jig
For routing Belfast /Butler sinks.|Made from 12mm hardwearing CNC machined Compact Grade High Pressure Laminate.|Will also allow drip channel groove to be routed on the underside of the worktop.|Corner radius of 25mm. Maximum distance 630mm or 1030mm when overlapping slots.|For sinks 1050mm wide and 440mm to 515mm deep.|Twin pin location for stable and accurate lining up of jig. Preset holes for 340mm, 360mm, 380mm, 400mm, 420mm, 440mm, 480mm and 500mm width, a packing piece required for sizes in between.|Jig requires:|A portable plunge router with 12.7mm (1/2 inch) shank capacity and minimum 1300 watts.|A template guide bush with 30mm outside diameter for main recess and 16mm outside diameter for water drip groove.|A TCT router cutter with 12.7mm (1/2 inch) diameter and 50mm (2 inch) cut length for main recess and a radius cytter R2.5mm for the water drip groove.|Two 100mm (4 inch) throat clamps.|Supplied with clear & comprehensive instructions for use.
Length= 625 mm|Width= 590 mm|Thickness=12 mm|Weight=3.6kg
Need to return a product? No problem! Hopefully you’ll never need to return an item, however, if you do, it is our aim to make this process as easy as possible.
Things to take into consideration before processing a refund / Exchange
- The item should not have been worn and should be in the same condition as when supplied (we appreciate you may have tried it on for size) All “tags” and labels should be intact.
- If the garment was supplied in its own bag then it must be returned in that bag in order to obtain a refund with all tags still attached. Please remember: If a garment is being returned it MUST be resaleable – So we are unable to accept an item that is screwed up and not in the condition where it can go back on the shelf
- If you are returning a worn garment that you feel may have developed a fault the cost of return will be the customers resposibilty and please remember the garment must be washed before sent, any garment returned unclean will be rejected.
- Also enclose a copy of the original sales receipt. If a manufacturing fault is confirmed the following applies. If the garment is under 6 weeks old a exchange or refund can be requested. If over 6 weeks then the garment can only be exchanged
If your looking to return a product please click the link for our easy returns form - Returns