Trend Pocket Hole Jig – Adaptable fast and simple jointing System
For fast and accurate joining of timber and plywood giving strong instant joints. |Solid hardened bushes with variable pitch of 29mm to 63mm. Use on timber, MDF, plywood and blockboard. |Allows a variety of joints to be created individually. |Square drive self tapping screws for use with a No.2 square drive bit to resist slipping (cam out).|Workpiece can be handled immediately after gluing & screwing creating time saving benefits. |No clamps required.
Material thickness min.=16 mm|Material thickness max.=38 mm|Material width min.=38 mm|Hole pitch=29 mm-63 mm|Drill diameter=9.5 mm|Square drive bit size=No.2|Screw sizes=No.7 x 30 mm
Need to return a product? No problem! Hopefully you’ll never need to return an item, however, if you do, it is our aim to make this process as easy as possible.
Things to take into consideration before processing a refund / Exchange
- The item should not have been worn and should be in the same condition as when supplied (we appreciate you may have tried it on for size) All “tags” and labels should be intact.
- If the garment was supplied in its own bag then it must be returned in that bag in order to obtain a refund with all tags still attached. Please remember: If a garment is being returned it MUST be resaleable – So we are unable to accept an item that is screwed up and not in the condition where it can go back on the shelf
- If you are returning a worn garment that you feel may have developed a fault the cost of return will be the customers resposibilty and please remember the garment must be washed before sent, any garment returned unclean will be rejected.
- Also enclose a copy of the original sales receipt. If a manufacturing fault is confirmed the following applies. If the garment is under 6 weeks old a exchange or refund can be requested. If over 6 weeks then the garment can only be exchanged
If your looking to return a product please click the link for our easy returns form - Returns