Routabout Jig 18mm x 1/2″ Shank
Access to pipes & cables beneath chipboard floors in seconds. |For builders, plumbers & electricians.|A 250mm diameter opening can be cut and made good in seconds. |Designed for use in new or existing 18mm chipboard or similar floors. |Cuts only the thickness of the board. |No waste, the piece cut out is used to make good the floor.|All you need is a plunge router (750 watts or above).|A Unibase may be required for certain makes and models of router.
Shank Diameter=1/2 inch|Floor thickness=18 mm|Access hole diameter=250 mm|Max. load capacity=200 kg
Need to return a product? No problem! Hopefully you’ll never need to return an item, however, if you do, it is our aim to make this process as easy as possible.
Things to take into consideration before processing a refund / Exchange
- The item should not have been worn and should be in the same condition as when supplied (we appreciate you may have tried it on for size) All “tags” and labels should be intact.
- If the garment was supplied in its own bag then it must be returned in that bag in order to obtain a refund with all tags still attached. Please remember: If a garment is being returned it MUST be resaleable – So we are unable to accept an item that is screwed up and not in the condition where it can go back on the shelf
- If you are returning a worn garment that you feel may have developed a fault the cost of return will be the customers resposibilty and please remember the garment must be washed before sent, any garment returned unclean will be rejected.
- Also enclose a copy of the original sales receipt. If a manufacturing fault is confirmed the following applies. If the garment is under 6 weeks old a exchange or refund can be requested. If over 6 weeks then the garment can only be exchanged
If your looking to return a product please click the link for our easy returns form - Returns