• Self Adhesive Tanking Membrane
  • self adhesive membrane (3)
  • self adhesive membrane (4)
  • self adhesive membrane (2)

1 / 4

Zoom In

  • Self Adhesive Tanking Membrane
  • self adhesive membrane (3)
  • self adhesive membrane (4)
  • self adhesive membrane (2)

0

DampPlasteringWaterproofing

Self Adhesive Tanking Membrane – 1M x 15M Roll

£134.99 Inc VAT

Self Adhesive Tanking Membrane - 1M x 15M Roll is for use in vertical tanking or horizontal self-adhesive applications, such as underground basements, lift pits or retaining walls when installed.

  • Self-adhesive membrane for above and below ground applications
  • Tough, high performance, high density polyethylene membrane
  • Provides resistance to puncture and tearing
  • Self Adhesive Tanking Membrane
read more

Compare

SKU:
VisqueenSAM1x15
view all details
Brand:
Brand:

TOP SELLER!

Description

Self Adhesive Tanking Membrane 1mtr x 15mtrs Roll is for use in vertical tanking or horizontal self-adhesive applications. Such as underground basements, lift pits or retaining walls when installed in accordance with BS8102:2009.

Self Adhesive Tanking Membrane is recommended that substrates are always primed with primer, concrete, masonry or steel at or below ground level.

  • Self-adhesive membrane for above and below ground applications
  • Tough, high performance, high density polyethylene membrane
  • Provides resistance to puncture and tearing
  • Use with primer to obtain best adhesion

For use in tanking external wall surfaces below ground level such as foundations and walls to basements and walls above ground but which are soil retaining.

  • Robust & Durable – the products combination of polymer modified bitumen on a polyethylene carrier makes it a tough and durable material choice
  • Ease of Use – the product is cold applied and does not use specialist tanking equipment, making it a cost effective, low labour application
  • Multi-Purpose – the product has multiple uses within the damp proofing and structural waterproofing arena
  • BBA approved (Certificate No. 98/3479)

Waterproofing performance with SBS polymer modified bitumen

  • Suitable for a range of substrates, cast concrete, brick and blockwork constructions• Suitable for tanking both internally and externally
  • Easy to install, progressively removing the silicone treated release film
  • Modified bitumen on both sides to provide additional security at laps
  • Laps are formed by simply bonding the exposed polymer modified bitumen layer to the polyethylene surface of the adjacent sheet)
  • BBA Approved (Cert No. 98/3479)

Performance and Composition

  • Composition: HDPE/Bitumen
  • Form: Roll
  • Colour: Black Upper/Black

General Dimension Data

  • Thickness: 1.5mm
  • Roll Length: 15m
  • Roll Width: 1.05m

Performance Data

  • Reaction to Fire (EN 13501
  • Water tightness (EN 192): F8): Pass
  • Resistance to water Penetration after artificial Ageing (EN 1847): Pass

Tensile properties:

  • Maximum tensile force (EN 12311-2): MD≥2.5N CD≥2.5N
  • Elongation at Break (EN 12311-1; EN 13859-1;2): MD≥130% CMD≥130%
  • Resistance to Impact (EN 12691): ≥500mm
  • Joint Strength (EN 12317-2): ≥30N

Features and Benefits

  • Robust and Durable – the products combination of polymer modified bitumen on a polyethylene carrier makes it a tough and durable material choice.
  • Ease of Use – the product is cold applied and does not use specialist tanking equipment, making it a cost effective, low labour application.
  • Multi-Purpose – the product has multiple uses within the damp proofing and structural waterproofing arena.

Application: Self Adhesive Tanking Membrane

The surface should be primed with a two coat application of Bitumen primer. Surfaces should be free of dust.

Remove the protective sheet and apply the membrane face down working from the centre towards the edges to minimise air pockets. Use a hand held roller to ensure a firm bond with the primer.
Overlap all sheets by 75mm. Double cover all internal and external corners by 300mm. If using as a damp proofing membrane dress the Bitubond self adhesive membrane to the damp proof course level.

Cover the Bitubond membrane within 2 – 3 days of application. Protection boards are available to protect against backfill or ply or insulation boards would be fine.

Reviews (0)

Be the first to review “Self Adhesive Tanking Membrane – 1M x 15M Roll”

  • There are no reviews yet.

Product Questions (FAQ)

Product Questions (FAQ) Ask a Question

Success!

Question Added Successfully

Private Question..?

Robot verification failed, please try again.

Sort by    
  • This Product have no Question..!