Call us on 01942 887920

Free mainland shipping on all orders over £75 +VAT to most UK postcodes (excludes NI and Ireland – see delivery page for details)

What is salt damp? 1

What is salt damp?

Nitrate, chloride, sulphate and ammonium salts are found in building structures.

Nitrate and chloride salts most commonly originate in the ground. Their presence in plasterwork is usually an indication of rising damp, hydrostatic or below ground damp or flood damage. Nitrate and chloride salts are hygroscopic, causing them to retain moisture and absorb additional moisture at times of high humidity. Coastal properties may suffer from chloride salt contamination due to salt water carried in the air. Barns or slaughterhouses are also buildings where high salt concentrations may be found due to livestock

Sulphate salt contamination of cement based plasters results in the cement content expanding up to 3 times its original mass and the plaster breaking down. Sulphate salts however are not typically hygroscopic.

Ammonium salts are a by-product of the burning of fossil fuels and are commonly found in chimney flues and chimney breasts. Nitrate and chloride salts are also found where ammonium salts are present. Ammonium salts are generally hygroscopic.

It is important when re-plastering a wall affected by salts that careful consideration is given to the type of plaster used. The water content of new plaster encourages salts to migrate from the underlying wall structure to the new plaster resulting in further problems.

Salt damp is closely associated with rising damp. When a new damp proof course is installed the lower wall areas are re-plastered with salt resistant plaster. Where damp proof course plaster has not been taken high enough, a salt band may occur.

At PAM Ties we sell a range of products to deal with these problems.

 Salt neutraliser – can be sprayed directly onto salt contaminated brick work

Salt neutraliser – can be sprayed directly onto salt contaminated brick work














Pam SBR – SBR has excellent waterproofing and sulphate resisting properties and can be added to render mixes














PAM Rend
Pam Rend – is an integral waterproofer salt inhibitor and plasticiser which can be added directly into render mixes














PAM Membranes

Pam membranes are an excellent way of of isolating plasterboard or renders from salt contaminated substrates
Free UK Wide Shipping to most UK postcodes

On All Orders Above £75 + VAT (excludes NI and Ireland) - see delivery page for details.

Easy 30 days returns

30 Days Money Back Guarantee

Free Expert Advice

Just Call Us Or Email

100% Secure Checkout

PayPal / MasterCard / Visa